It looks like you’re visiting from the United States. For the best experience, please visit our U.S. website operated by Powerlube Industrial, our U.S. subsidiary and premium Memolub distributor.

Go to powerlubeind.com
Memolub Connect Pro Tech Specs

MEMOLUB CONNECT SERIES KNOWLEDGE BASE

Read more Print Download User Guide Download Technical Data Sheet Download TDS and User Guide

INDLEDNING

I korte træk

MEMOLUB CONNECT PRO er et elektromekanisk smøresystem til anvendelser med et eller flere smørepunkter. Det fås i tre størrelser af smørefedtpatroner (120 cc, 240 cc, 480 cc) og én genopfyldelig olietank (OIL-R500, 500 cc), hvilket gør det velegnet til både smøring med smørefedt og olie.

Enheden drives af et batteripakke eller en ekstern strømforsyning på mellem 6 og 36 VDC. Dens tokomponentdesign adskiller de dele, der skal vedligeholdes (udskiftelig patron eller genopfyldelig beholder, batterier), fra de fastmonterede indstillinger, hvilket muliggør vedligeholdelse uden at forstyrre konfigurationen ved smørepunktet.

Med et udstødningstryk på 25 bar dækker systemet anvendelser, der ligger uden for konventionelle smøresystemers rækkevidde. Ved hjælp af en progressiv fordelingsblok (fås som tilbehør) understøtter det op til 8 smørepunkter med fedt eller 12 smørepunkter med olie samtidigt. Enheden monteres direkte på smørepunktet eller fjernmonteres via rør eller fleksibel slange.

Tilslutningsmuligheder og fjernovervågning

MEMOLUB CONNECT PRO integrerer Bluetooth- og LoRaWAN-forbindelse. Bluetooth-appen giver adgang til enhedens status og indstillinger på stedet. LoRaWAN muliggør fuld fjernadgang: overvågning, alarmer og justering af indstillinger fra ethvert sted. Memolub tilbyder en brugsklar platform, og integration i kundeejede LoRaWAN-platforme understøttes.

LED'er med høj synlighed og i alle retninger angiver enhedens status lokalt. Systemet overvåger pumpens drift, batteriniveauet og patronens fyldningsniveau. Alarmer kan tilgås via Bluetooth-appen og LoRaWAN-platformen, med automatisk e-mail-besked ved alarmdetektering. Den interne temperatur kan også aflæses via begge platforme. En testknap i bunden af enheden muliggør manuel kontrol.

Dimensioner

120CC

Grease / Oil Cartridge

120cc I 4oz
Memolub Connect Series Dimentions 120

240CC

Grease / Oil Cartridge

240cc I 8.1oz
Memolub Connect Series Dimentions 240

480CC

Grease / Oil Cartridge

480cc I 16.2oz
Memolub Connect Series Dimentions 480

OIL R-500

Refillable Oil Reservoir

500cc I 16.9oz
Memolub Connect Series Dimentions 500 R

Forsigtighedsforanstaltninger

  • Åbn ikke huset: spændt fjeder
  • Hold MEMOLUB® nede under manuelle kontroller
  • Leq <70 dB
  • Brug kun MEMOLUB® til smøring af maskiner
  • Brug kun smøremiddelpatroner og batterier, der er anbefalet af producenten
Memolub Visio Warnings

Specifikationer

Generelt

MEMOLUB® CONNECT PRO
Ydre dimensioner Ø101 mm, H138 (std) til 251 mm (Giga)
Temperaturområde -40 til +60 °C*
Forbindelser BSP M1/4''
Smøremidler Olie og fedt, op til NLGI 2**
Maksimalt slagtryk 25 bar/ 350 PSI

*Gælder kun med batterier og smøremidler, der er egnet til lave temperaturer

** For andre konsistenser bedes du kontakte din lokale forhandler

Elektrisk

MEMOLUB® CONNECT PRO
Strømkilde Batteri / Eksternt
Spænding 4,5 V DC (3 x 1,5 V DC AA) ELLER 24 V
Kortslutningsbeskyttelse Ja
Slagvarighed 8 sekunder
Minimumsinterval 15 minutter
Kommunikationsprotokol LoRaWAN + Bluetooth
Visning Lokalt: RGB-LED'er; Fjernbetjent: via app og cloud-grænseflade

SMØRING

Der er grundlæggende to driftsformer til brug af VISIO CONNECT til smøring af en applikation:

1) Periodisk tilstand: Systemet udfører en udstødning for hver defineret periode. Perioden kan indstilles enten:

a) Lokalt på det roterende kodershjul – position 1 til 9, med tilhørende forudindstillede frekvenser angivet i afsnittet "FREKVENS" (se næste afsnit).

b) Fjernbetjent via den trådløse LoRa- eller Bluetooth-grænseflade *

2) On-demand-tilstand: ved hjælp af den kabelførte forbindelse (6 DIN M16-stik – ledningerne n1 og n2) **


LUBRICATION MODE MIN. OUTPUT MAX. OUTPUT INTERFACE
Periodisk 0,17 cc/dag 14,4 cc/dag Lokalt: enkoderhjul, slagsskiver
Periodisk 0 cc/dag 57,6 cc/dag Fjernbetjening: LoRaWAN, Bluetooth
On-demand 0 cc/dag 864 cc/dag 6-DIN M16-stik

* Lokalt roterende encoderhjul indstillet på position 0. Se afsnittet TRÅDLØS STYRING for detaljerede oplysninger.

** Se afsnittene KABELFORBINDELSER og KABELSTYRING for implementering.

LoRaWAN

MEMOLUB® CONNECT PRO
Version 1.1.4
Understøttede frekvensplaner EU863-870, AU915-928, US902-928,
Rækkevidde (udendørs, fri sigt) 1 km*

* Rækkevidde baseret på feltforsøg udført i et bymiljø ved hjælp af en gateway udstyret med en 3 dBi-antenne.

Bluetooth

MEMOLUB® CONNECT PRO
Version 5.2
Hyppighed 2,4 GHz
Rækkevidde (indendørs, kontormiljø) 30m
Rækkevidde (udendørs, fri sigt) 150 m

Settings & Feedback

FREKVENSINDSTILLINGER

Nedenstående tabel vedrører de indstillinger, der er tilgængelige i den periodiske smøremodus.

WHEEL POSITION DOSING PERIODICITY MAX. DAILY OUTPUT* REFILLING FREQUENCY VS. CARTRIDGE CONTENT (120CC) REFILLING FREQUENCY VS. CARTRIDGE CONTENT (240CC) REFILLING FREQUENCY VS. CARTRIDGE CONTENT (480CC)
Eksternt (grænseflade / app)
1 48 timer 0,3 cc/dag 12 måneder 24 måneder** 48 måneder**
2 24 timer 0,6 cc/dag 6 måneder 12 måneder 24 måneder**
3 16 timer 0,9 cc/dag 4 måneder 8 måneder 16 måneder**
4 12 timer 1,2 cc/dag 3 måneder 6 måneder 12 måneder
5 8 timer 1,8 cc/dag 2 måneder 4 måneder 8 måneder
6 6 timer 2,4 cc/dag 1,5 måned 3 måneder 6 måneder
7 4 timer 3,6 cc/dag 1 måned 2 måneder 4 måneder
8 2 timer 7,2 cc/dag 0,5 måned 1 måned 2 måneder
9 1 time 14,4 cc/dag 0,25 måned 0,5 måned 1 måned

*Maksimal daglig ydelse uden slagskiver.

** Vær opmærksom på smøremidlets udløbsdato ved lange patronlevetider.

VOLUMENINDSTILLINGER [cm³/dag]

Ved at bruge slagskiver kan du justere den mængde smøremiddel, der udledes pr. pumpecyklus.

NUMBER OF STROKE WASHERS WHEEL POSITION
1 2 3 4 5 6 7 8 9
- Eksternt (grænseflade / app) 0,3 0,6 0,9 1.2 1.8 2.4 3.6 7.2 14.4
Eksternt (grænseflade / app) 0,28 0,56 0,84 1.12 1.7 2.2 3.4 6.7 13,5
[SKIVE]+ [LÅSERING] Eksternt (grænseflade / app) 0,26 0,52 0,79 1,04 1,62 2.1 3.15 6.3 12.6
2 [SKIVE]+ [LÅSERING] Eksternt (grænseflade / app) 0,24 0,49 0,73 0,98 1,46 1,95 2,92 5,85 11.7
3 [SKIVE]+ [LÅSERING] Eksternt (grænseflade / app) 0,22 0,45 0,67 0,9 1,35 1.8 2.7 5.4 10,8
4 [SKIVE]+ [LÅSERING] Eksternt (grænseflade / app) 0,2 0,41 0,62 0,82 1.23 1,65 2,47 4,95 9,9
5 [SKIVE]+ [LÅSERING] Eksternt (grænseflade / app) 0,18 0,37 0,55 0,74 1.1 1.5 2.2 4,5 9
6 [SKIVE]+ [LÅSERING] Eksternt (grænseflade / app) 0,17 0,34 0,5 0,68 1 1,35 2.02 4.05 8.1

*Låseringen skal altid monteres oven på skiverne.

Låseringen skal altid monteres oven på skiverne.

VISUAL FEEDBACK

2ND GENERATION (SERIAL NUMBERS CNP-2-XX-XXXX)

COLOR STATUS
The test run was initiated through pushbutton.The pumping cycle ran successfully,
Battery low / Lubricant cartridge empty.
Gearbox damaged
Data connection successful.
Incomplete dose delivery / Counterpressure detected before pump cycle.

For detailed explanations and solutions, please refer to the FAQs section.

REMOTE INSTALLATION DISTANCES

TYPE OF INSTALLATION MAXIMUM DISTANCE
Single point 8m
Multipoint with 2 outlets 6m
Multipoint with 4 outlets

KABEL

MEMOLUB CONNECT PRO

The Connect Pro is delivered with a 6 x 0.25mm² cable with a 6DIN M16 female connector.

DESCRIPTION
1. EXTERNAL INPUT (OPTOCOUPLER INPUT +)
2. EXTERNAL INPUT (OPTOCOUPLER INPUT -)
3. POWER SUPPLY + (24VAC/DC)*
4. STATUS OUTPUT (OPTOCOUPLER COLLECTOR)
5. STATUS OUTPUT (OPTOCOUPLER EMITTER)
6. POWER SUPPLY - (0VDC)

* Operating voltage ranges from 6 to 36 VDC

KABELFORBUNDET STYRING

ON-DEMAND-TILSTAND

Som nævnt i specifikationerne kan enkeltudløsninger udløses via kabelstyring. Dette afsnit forklarer signalkravene for, at denne styring kan fungere effektivt.

Bemærk, at periodisk og on-demand-tilstand IKKE udelukker hinanden: Begge kan være aktive samtidigt. Hvis du ikke ønsker, at den periodiske tilstand skal være aktiv, skal du indstille enkoderhjulet til position "0" og undlade at bruge trådløse grænseflader.

Endelig er on-demand-styring mere fleksibel end periodisk styring og bør implementeres omhyggeligt under hensyntagen til smøremidlets og anvendelsens særlige egenskaber. Ellers vil den effektive smøremiddeludledning muligvis ikke svare til de forventede værdier.

Intermitterende signal

MEMOLUB CONNECT

DESCRIPTION SIGNAL
INDGANGSSIGNAL (FRA KUNDENS PLC/TIMER)
UDGANGSSIGNAL "BUSY" (TIL KUNDENS PLC)
PUMPENS UDGANG (TIL SMØRING)
UDGANGSSIGNAL "STANDARD" (TIL KUNDENS PLC)

Kontinuerligt signal

MEMOLUB CONNECT

DESCRIPTION SIGNAL
INDGANGSSIGNAL (FRA KUNDENS PLC/TIMER)
UDGANGSSIGNAL "BUSY" (TIL KUNDENS PLC)
PUMPENS UDGANG (TIL SMØRING)
UDGANGSSIGNAL "STANDARD" (TIL KUNDENS PLC)

TRÅDLØS STYRING

INDLÆRINGSPERIODE

Memolub Connect Pro er udstyret med avancerede maskinlæringsfunktioner, der gør det muligt at tage højde for miljøforholdene ved beregning af enhedens status. Der kræves en indlæringsperiode på 20 cykler, hvor smøreapparatet skal forblive i det samme miljø uden ændringer i dets position, fastgørelse, understøtning eller smøremidletype. Hvis nogen af disse parametre ændres, kan indlæringsprocessen nulstilles ved at holde trykknappen nede i mere end 5 sekunder.

INSTALLATION GUIDELINES

DIRECT INSTALLATION

  • 1

    B1

    Prime lube point and remove nipple.

  • 2

    B2

    Install VISIO Base using a strong threadlocker (BSP 1/4).

  • 3

    B3

    With setting key, choose wheel position according to "Settings" table above.

  • 4

    B4

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 5

    B5

    Screw tightly keeping the assemly aligned.

  • 6

    B6

    VISIO initializes, flashes each color on, and makes one expulsion. Green lights confirm normal operation.

  • 1

    B1

    Prime lube point and remove nipple.

  • 2

    B2

    Install VISIO Base using a strong threadlocker (BSP 1/4).

  • 3

    B3

    With setting key, choose wheel position according to "Settings" table above.

  • 4

    B4

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 5

    B5

    Screw tightly keeping the assemly aligned.

  • 6

    B6

    VISIO initializes, flashes each color on, and makes one expulsion. Green lights confirm normal operation.

REMOTE INSTALLATION

  • 1

    C1

    Prime lube point and remove nipple.

  • 2

    C2

    Secure the mounting bracket.

  • 3

    C3

    Install VISIO Base and F1/4 fitting on bracket using a strong threadlocker.

  • 4

    C4

    Install BSP 1/8 fitting on lube point.

  • 5

    C5

    Cut hose to required size.

  • 6

    C6

    Insert hose into bracket's quick fitting.

  • 7

    C7

    Insert hose into lube point's quick fitting.

  • 8

    C8

    With setting key, choose wheel position according to "Settings" table above.

  • 9

    C9

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 10

    C10

    Screw tightly keeping the assembly aligned.

  • 11

    C12

    VISIO initializes, flashes each color on, and makes one expulsion. Green lights confirm normal operation.

  • 1

    C1

    Prime lube point and remove nipple.

  • 2

    C2

    Secure the mounting bracket.

  • 3

    C3

    Install VISIO Base and F1/4 fitting on bracket using a strong threadlocker.

  • 4

    C4

    Install BSP 1/8 fitting on lube point.

  • 5

    C5

    Cut hose to required size.

  • 6

    C6

    Insert hose into bracket's quick fitting.

  • 7

    C7

    Insert hose into lube point's quick fitting.

  • 8

    C8

    With setting key, choose wheel position according to "Settings" table above.

  • 9

    C9

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 10

    C10

    Screw tightly keeping the assembly aligned.

  • 11

    C12

    VISIO initializes, flashes each color on, and makes one expulsion. Green lights confirm normal operation.

MULTIPOINT INSTALLATION

  • 1

    D1

    Prime lube point and remove nipple.

  • 2

    D2

    Secure the mounting bracket.

  • 3

    D3

    Install VISIO Base and F1/4 fitting on bracket using a strong threadlocker.

  • 4

    D4

    Install BSP 1/8 fitting on lube point.

  • 5

    D5

    Cut the hoses to required size.

  • 6

    D6

    Insert hoses into bracket's quick fittings.

  • 7

    D7

    Insert hoses into lube points' quick fittings.

  • 8

    D8

    With setting key, choose wheel position according to "Settings" table above.

  • 9

    D9

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 10

    D10

    Screw tightly keeping the assembly aligned.

  • 11

    D12

    VISIO initializes, flashes each color on, and makes one expulsion. Green lights confirm normal operation.

  • 1

    D1

    Prime lube point and remove nipple.

  • 2

    D2

    Secure the mounting bracket.

  • 3

    D3

    Install VISIO Base and F1/4 fitting on bracket using a strong threadlocker.

  • 4

    D4

    Install BSP 1/8 fitting on lube point.

  • 5

    D5

    Cut the hoses to required size.

  • 6

    D6

    Insert hoses into bracket's quick fittings.

  • 7

    D7

    Insert hoses into lube points' quick fittings.

  • 8

    D8

    With setting key, choose wheel position according to "Settings" table above.

  • 9

    D9

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 10

    D10

    Screw tightly keeping the assembly aligned.

  • 11

    D12

    VISIO initializes, flashes each color on, and makes one expulsion. Green lights confirm normal operation.

PUSH BUTTON

TEST YOUR MEMOLUB / FORCE EXPULSION

  • 1

    E2

    Locate the push button on the bottom of the memo

  • 2

    E2

    Push the button

  • 3

    E4

    VISIO initializes, flashing each color on successively.

  • 4

    E5

    VISIO makes 1 expulsion.

  • 5

    E6

    After scanning all parameters, VISIO flashes green lights in case of normal operation. For any other colors, please refer to the FAQ section.

  • 1

    E2

    Locate the push button on the bottom of the memo

  • 2

    E2

    Push the button

  • 3

    E4

    VISIO initializes, flashing each color on successively.

  • 4

    E5

    VISIO makes 1 expulsion.

  • 5

    E6

    After scanning all parameters, VISIO flashes green lights in case of normal operation. For any other colors, please refer to the FAQ section.

CARTRIDGE (RE)PLACEMENT GUIDELINES

  • 1

    A1

    Remove VISIO Module from VISIO Base.

  • 2

    A2

    Open VISIO Module (fingers on ribs). Remove the used cartridge, if any.

  • 3

    A3

    Prime VISIO Pump.

  • 4

    A4

    Insert new battery pack and seal. NOTE: the battery seal can be removed for 480cc cartridges

  • 5

    A5

    Squeeze air out of the cartridge.

  • 6

    A6

    Replace the cartridge on VISIO Pump.

  • 7

    A7

    Close and lock VISIO Module (fingers on ribs).

  • 8

    A8

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 9

    A9

    Screw tightly keeping the assembly aligned.

  • 10

    A10

    VISIO initializes, flashes each color on, and makes one expulsion. Green light confirms proper functioning.

  • 1

    A1

    Remove VISIO Module from VISIO Base.

  • 2

    A2

    Open VISIO Module (fingers on ribs). Remove the used cartridge, if any.

  • 3

    A3

    Prime VISIO Pump.

  • 4

    A4

    Insert new battery pack and seal. NOTE: the battery seal can be removed for 480cc cartridges

  • 5

    A5

    Squeeze air out of the cartridge.

  • 6

    A6

    Replace the cartridge on VISIO Pump.

  • 7

    A7

    Close and lock VISIO Module (fingers on ribs).

  • 8

    A8

    Align the pin of VISIO Module with the notch of VISIO Base.

  • 9

    A9

    Screw tightly keeping the assembly aligned.

  • 10

    A10

    VISIO initializes, flashes each color on, and makes one expulsion. Green light confirms proper functioning.

EXTERNAL POWER CONNECTION

INSTALLING THE CONNECTOR (CONNECT PRO ONLY)

  • 1

    Visio E Pconnector Installation1

    Locate the M4 set screw on the CONNECT PRO BASE rotary coupling. Screw it tightly.

  • 2

    Visio E Pconnector Installation2bis

    Screw tightly the CONNECT PRO pump & base on the bracket elbow

  • 3

    Visio E Pconnector Installation3

    Release the rotary coupling by unscrewing the M4 screw.

  • 4

    Visio E Pconnector Installation4

    Rotate the CONNECT PRO pump & base assembly clockwise, until the connector socket is outside the bracket.

  • 5

    Visio E Pconnector Installation5

    Check that the cable plug can engage properly on the connector socket

  • 6

    Visio E Pconnector Installation6

    Keeping the plug engaged, secure the M4 set screw tightly.

  • 7

    Visio E Pconnector Installation7

    The rotary coupling is now set. When disassembling/reassembling pump and base for maintenance pruposes, the connector will always find the same place.

  • 1

    Visio E Pconnector Installation1

    Locate the M4 set screw on the CONNECT PRO BASE rotary coupling. Screw it tightly.

  • 2

    Visio E Pconnector Installation2bis

    Screw tightly the CONNECT PRO pump & base on the bracket elbow

  • 3

    Visio E Pconnector Installation3

    Release the rotary coupling by unscrewing the M4 screw.

  • 4

    Visio E Pconnector Installation4

    Rotate the CONNECT PRO pump & base assembly clockwise, until the connector socket is outside the bracket.

  • 5

    Visio E Pconnector Installation5

    Check that the cable plug can engage properly on the connector socket

  • 6

    Visio E Pconnector Installation6

    Keeping the plug engaged, secure the M4 set screw tightly.

  • 7

    Visio E Pconnector Installation7

    The rotary coupling is now set. When disassembling/reassembling pump and base for maintenance pruposes, the connector will always find the same place.

CLOUD-GRÆNSEFLADE

Memolub IOT Home

Platform home

The platform home screen welcomes the user and provides an entry point into the connected device fleet. From here, users navigate to their assigned sites and device groups via the left-hand panel.

Memolub IOT Lubricator Overview

Device overview

The device overview lists all connected units within a site, showing key identifiers such as Memolub ID, location name, lubricant type, cartridge volume, and lubrication frequency. A map view below the list displays the geographic position of all installed units, giving operators an immediate picture of their installation footprint.

Memolub IOT Lubricator Settings

Lubricator Dashboard

The device dashboard provides a full status overview of a single unit, including real-time readings for temperature, battery level, mechanical condition, lubrication flow, and remaining cartridge volume. Device configuration and alarm thresholds are accessible and adjustable directly from this screen. Three remote commands are available: Force Expulsion, Find Me, and Reset Volume.

Memolub IOT Lubricator Alerts

Alarm and event log

The alarm screen logs all alarm events for the selected device, showing appearance and disappearance timestamps for each triggered condition. An event occurrence table alongside it summarises trigger sources and their frequency over a user-defined time period, supporting trend analysis and maintenance planning.

Memolub IOT Lubricator Settings

Settings and alarm thresholds

The settings view exposes sensor parameters and configurable alarm thresholds in a single screen. Thresholds cover cartridge volume, battery level, and temperature, each with warning and critical levels. All settings are adjustable remotely via the platform.

Memolub IOT Lubricator Report

Reports

The report screen presents cartridge volume, battery level, and temperature as separate time-series charts over a user-defined period. Each chart plots the measured value against its configured alarm threshold, giving operators a clear visual reference for how device performance compares to set limits over time.

Ofte stillede spørgsmål

  • Nothing happens after screwing the pump on the base or after pushing the pushbutton

    • The pin of the pump is possibly not proper aligned with the notch of the base. Unscrew the pump from the base, align correctly and screw it again.
    • VISIO Pump is not tightly screwed to VISIO Base. Turn it clockwise until stop.
    • There is possibly no battery inside the pump, or batteries are off. Insert/replace the battery pack to resolve the issue.
    • There is possibly something obstructing the communication between the base and the pump contacts. Unscrew the pump from the base, remove any dust or obstacles from the base and the pump contacts and screw back together tightly.

  • The red lights are blinking periodically.

    • There is possibly something obstructing the communication between the pump and base contacts. Unscrew the pump from the base, remove any dust or obstacles from the base and the module contacts and screw back together tightly.
    • The gearmotor is broken. Replacement of the pump is necessary.

  • The yellow lights are blinking periodically.

    • There is possibly something obstructing the communication between the pump and base contacts. Unscrew the pump from the base, remove any dust or obstacles from the base and the module contacts and screw back together tightly.
    • The batteries are empty. Replacement of the battery pack is necessary.

  • The blue lights keep alight.

    • The bluetooth connection is established.
    • The data has been successfully transmitted to the LoRaWAN gateway

  • The cyan light blinks after the piston stroke

    • The previous dose has not been fully delivered. If there is no stroke washer, this may indicate excessive residual pressure. Please check the downstream piping for any clogging or blockage. Decrease the piping length, increase piping section, reduce NLGI grade of the grease. If these solutions are not possible or do not improve the situation, please try increasing the frequency by two to compensate dose depreciation.

VIDEOER

REGULATORISKE OPLYSNINGER

SYMBOL DESCRIPTION
This product is compliant with Directives 2006/42/EC (Machinery). The relevant Declaration of Conformity is available here.
This product is compliant with UK regulations 2008 No. 1597 (Supply of Machinery). The relevant Declaration of Conformity is available here.
This product is compliant with customs union technical regulation TR CU 010/2011 (safety of machines and equipment). The relevant Declaration of Conformity is available here.
The WEEE symbol is attached to the product in compliance with the EU directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It is intended to deter the improper disposal of this product and to promote reuse and recycling.
The packaging material can be recycled. Please arrange for the environmental appropriate disposal of the packaging.