It looks like you’re visiting from the United States. For the best experience, please visit our U.S. website operated by Powerlube Industrial, our U.S. subsidiary and premium Memolub distributor.

Go to powerlubeind.com

LORAWAN GATEWAY OUTDOOR

Read more Print Download User Guide Download Technical Data Sheet

Ürün Açıklaması

Memolub Connect Serisi Dış Mekan ağ geçidi, endüstriyel sınıf bileşenlere sahiptir ve yüksek düzeyde güvenilirlik sağlar. 16 adede kadar LoRa kanalını destekler ve Ethernet, Wi-Fi ve hücresel bağlantı ile çoklu ana taşıyıcı seçenekleri sunar. Ayrıca, güneş panelleri ve piller dahil olmak üzere çeşitli güç seçenekleri için özel bir bağlantı noktası sunar. Yeniden tasarlanan muhafazası, gelişmiş estetik ve işlevsellik için LTE, Wi-Fi ve GPS antenlerini dahili olarak barındırır. Ağ geçidi, en yeni OpenWrt çekirdeğine dayalı güvenli ve esnek bir işletim sistemi üzerinde çalışır. Gelişmiş özelleştirme için genişletme modüllerini destekler ve WisDM aracılığıyla merkezi uzaktan yönetim ve yapılandırma olanağı sunar; bu da onu büyük ölçekli ağ geçidi ağlarının kurulumu ve işletimi için ideal hale getirir.

UYARI: Bu ürün, belirlenen bir güç bağlantı noktası üzerinden 12 VDC ile çalıştırılmak üzere tasarlanmıştır. Güneş enerjili şarj cihazlarının kullanımı, aşırı gerilim sağlayarak cihaza zarar verebileceğinden tavsiye edilmez. Bu ürünle bu tür şarj cihazlarının kullanılmasını kesinlikle önermiyoruz; bunun sonucunda meydana gelen her türlü hasar, garantiyi geçersiz kılacaktır.

Ürün Özellikleri

Donanım

  • Kablo rakorlu IP67/NEMA-6 endüstriyel sınıf muhafaza
  • PoE (802.3af) + Aşırı Gerilim Koruması
  • 16 kanala kadar seçenek sunan çift LoRa yoğunlaştırıcı
  • Backhaul: Wi-Fi, Ethernet ve LTE (isteğe bağlı, RAK7289CV2 ile mevcuttur)
  • GPS
  • Elektrik izleme özelliğine sahip 12 VDC veya güneş enerjisi beslemesini destekler (Güneş Enerjisi Kiti isteğe bağlı)
  • Wi-Fi, GPS ve LTE için dahili antenler, LoRa için harici anten
  • Son nefes

Yazılım

  • Ağ geçidini yapılandırmak ve yönetmek için işletim sistemi.
  • OpenVPN, WireGuard VPN ve daha fazlası gibi özellikler için destek ekleyen uzantılar.
  • WisDM ile uzaktan yönetim Filo Yönetimi
  • Yerleşik Ağ Sunucusu (tam LoRaWAN desteği v1.0.3)
  • Semtech SX1303 ile tam LoRaWAN Yığını desteği
  • LoRa Çerçeve filtreleme (Paket Yönlendirici modunda düğüm beyaz listeye alma)
  • TLS şifrelemeli MQTT v3.1 köprüleme
  • Hassas zaman damgalama
  • Paket İletici modunda
  • NS kesintisi durumunda (veri kaybı olmadan)
  • Konuşmadan Önce Dinle (isteğe bağlı)

Installation Guidelines

SIM Card Installation

  • 1

    Unscrewing interface

    Start by unscrewing the cap of the NanoSIM interface on the gateway enclosure to expose the SIM card slot.

  • 2

    Insert SIM card

    Push the SIM card into the card slot according to the placement method marked on the interface.

  • 3

    Unscrewing interface

    Once completed, screw back the metal cap. Make sure it is tightly screwed.

  • 1

    Unscrewing interface

    Start by unscrewing the cap of the NanoSIM interface on the gateway enclosure to expose the SIM card slot.

  • 2

    Insert SIM card

    Push the SIM card into the card slot according to the placement method marked on the interface.

  • 3

    Unscrewing interface

    Once completed, screw back the metal cap. Make sure it is tightly screwed.

Mounting

  • 1

    2 mounting

    Fix the bracket included in the mounting kit on the bottom of the enclosure with four M6*12 screws.

  • 2

    3 clamps

    Position the pole clamps together around the pole, then tighten them with bolts, washers, and nuts.

  • 3

    5 fasten enclosure 2

    Mount the enclosure and secure it to the bracket.

  • 4

  • 1

    2 mounting

    Fix the bracket included in the mounting kit on the bottom of the enclosure with four M6*12 screws.

  • 2

    3 clamps

    Position the pole clamps together around the pole, then tighten them with bolts, washers, and nuts.

  • 3

    5 fasten enclosure 2

    Mount the enclosure and secure it to the bracket.

  • 4

Weather protection

To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them with PVC tape.

  • 1

    7 pvc tape

    Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector.

  • 2

    8 waterproof tape

    Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds.

  • 3

    9 pvc wrapping

    Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Ensure to cover the head and the tail of the connector.

  • 1

    7 pvc tape

    Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector.

  • 2

    8 waterproof tape

    Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds.

  • 3

    9 pvc wrapping

    Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Ensure to cover the head and the tail of the connector.

Connect the PoE Adapter

If you choose to power the gateway via PoE or access the gateway and internet via the ETH port, you need to refer to this section. Otherwise, skip it.

Connect one end of the Ethernet cable (Cat5e or better) to the ETH(PoE) port on the gateway and the other end to the PoE port of the PoE injector.

Connecting through ethernet

To access the Internet through the ETH (PoE) port, make sure you have completed the steps defined in the "Connect the PoE Adapter section".

Lightning Protection

This section covers the installation of the lightning surge protection system when deploying the RAK7289V2/RAK2789CV2 gateway, both outdoors and indoors. Such a protection system must be taken into consideration to ensure a fully functional gateway without interruptions or damage from lightning.

Outdoor Surge Protection System

Antenna Grounding: we recommend nstalling a lightning arrestor on all the antenna N-type terminals. The arrestors must be N-type Female to Male to fit the antenna and enclosure connectors. Ensure you use a 10 AWG or better wire to connect the screw terminals of the arrestors to the grounding rail mounted on the building wall (grounding bar in the case of field deployment).

Gateway Grounding: Additionally, it is recommended to use another 10 AWG or better grounding wire to connect the screw terminal on the bottom-left side of the gateway casing to the grounding rail (bar).

No additional protection for the Ethernet cabling is required on the gateway side. It already has a built-in surge protection system (GDT + Anti-surge resistor).

Indoor Surge Protection

For protecting the indoor equipment and circuitry connected to the gateway, it is recommended to install an Ethernet port SPD lightning arrestor. This device should be positioned along the cabling that connects the gateway to the PoE injector. Make sure you connect its grounding wire terminal to an appropriate building grounding point.

Should you fail to adhere to the recommendations in this document, RAKwireless carries no responsibility for any damage your equipment incurs due to a lightning strike.

Power On the Gateway


Do not power the device if any antenna port has been left open.

The gateway supports multiple power supply options. Connect the gateway to the appropriate power source based on your needs.

Power Cord + PoE Adapter: The gateway is powered via PoE, make sure you have completed the steps defined in the Connect the PoE Adapter section.

  1. Connect one end of the power cord to the PoE adapter.
  2. Connect the other end of power cord to a power outlet, your gateway can be powered on.

DC Cable: The gateway is powered by an external DC power supply. You need to use the DC cable to connect an external power supply. The external power supply voltage range: 12 VDC.

SSS

  • How do I power the gateway safely?

    The gateway should be powered using a 12V DC power supply or through PoE (Power over Ethernet, 802.3af). Do not use solar chargers directly. They can supply unstable voltages and may damage the device.

  • Can I use this gateway in off-grid or remote environments?

    Yes. The gateway is compatible with the RAK Battery Plus, making it suitable for solar-powered or off-grid setups.

  • How do I manage the gateway remotely?

    You can manage it using WisDM, RAK’s cloud-based device management platform. It allows you to monitor, configure, and update your gateways remotely. Create a WisDM account, add your gateway by serial number, and start managing devices across your network. Ensure your gateway has internet access for cloud syncing.

  • Does the gateway support firmware updates over the air (FUOTA)?

    Yes. WisGateOS 2 combined with WisDM enables remote firmware updates, configuration changes, and device monitoring.