It looks like you’re visiting from the United States. For the best experience, please visit our U.S. website operated by Powerlube Industrial, our U.S. subsidiary and premium Memolub distributor.

Go to powerlubeind.com

LORAWAN GATEWAY OUTDOOR

Read more Print Download User Guide Download Technical Data Sheet

Descrizione del prodotto

Il gateway Memolub Connect Series Outdoor è dotato di componenti di livello industriale e garantisce un elevato livello di affidabilità. Supporta fino a 16 canali LoRa e offre opzioni multi-backhaul con connettività Ethernet, Wi-Fi e cellulare. Inoltre, offre una porta dedicata per varie opzioni di alimentazione, tra cui pannelli solari e batterie. Il suo involucro riprogettato ospita al suo interno antenne LTE, Wi-Fi e GPS per una migliore estetica e funzionalità. Il gateway funziona con un sistema operativo sicuro e flessibile basato sull’ultimo kernel OpenWrt. Supporta moduli di espansione per una maggiore personalizzazione e offre gestione e configurazione remote centralizzate tramite WisDM, rendendolo ideale per l’implementazione e la gestione di reti di gateway su larga scala.

AVVERTENZA: Questo prodotto è progettato per essere alimentato a 12 V CC tramite una porta di alimentazione dedicata. L’uso di caricabatterie solari non è raccomandato, poiché potrebbero fornire sovratensioni, danneggiando potenzialmente il dispositivo. Sconsigliamo vivamente l’uso di tali caricabatterie con questo prodotto; eventuali danni causati da tale utilizzo comporteranno l’annullamento della garanzia.

Caratteristiche del prodotto

Hardware

  • Custodia di livello industriale IP67/NEMA-6 con pressacavi
  • PoE (802.3af) + protezione contro le sovratensioni
  • Doppio concentratore LoRa per opzioni fino a 16 canali
  • Backhaul: Wi-Fi, Ethernet e LTE (opzionale, disponibile con RAK7289CV2)
  • GPS
  • Supporta alimentazione a 12 V CC o solare con monitoraggio dell’energia elettrica (kit solare opzionale)
  • Antenna interna per Wi-Fi, GPS e LTE; antenna esterna per LoRa
  • L'ultimo respiro

Software

  • Sistema operativo per la configurazione e la gestione del gateway.
  • Estensioni per aggiungere il supporto a funzionalità quali OpenVPN, WireGuard VPN e altro ancora.
  • Gestione remota con WisDM Fleet Management
  • Server di rete integrato (supporto completo per LoRaWAN v1.0.3)
  • Supporto completo dello stack LoRaWAN con Semtech SX1303
  • Filtraggio dei frame LoRa (whitelist dei nodi in modalità Packet Forwarder)
  • Bridge MQTT v3.1 con crittografia TLS
  • Marcatura temporale precisa
  • Bufferizzazione dei frame LoRa in modalità Packet
  • Forwarder in caso di interruzione del servizio NS (senza perdita di dati)
  • Listen Before Talk (opzionale)

Installation Guidelines

SIM Card Installation

  • 1

    Unscrewing interface

    Start by unscrewing the cap of the NanoSIM interface on the gateway enclosure to expose the SIM card slot.

  • 2

    Insert SIM card

    Push the SIM card into the card slot according to the placement method marked on the interface.

  • 3

    Unscrewing interface

    Once completed, screw back the metal cap. Make sure it is tightly screwed.

  • 1

    Unscrewing interface

    Start by unscrewing the cap of the NanoSIM interface on the gateway enclosure to expose the SIM card slot.

  • 2

    Insert SIM card

    Push the SIM card into the card slot according to the placement method marked on the interface.

  • 3

    Unscrewing interface

    Once completed, screw back the metal cap. Make sure it is tightly screwed.

Mounting

  • 1

    2 mounting

    Fix the bracket included in the mounting kit on the bottom of the enclosure with four M6*12 screws.

  • 2

    3 clamps

    Position the pole clamps together around the pole, then tighten them with bolts, washers, and nuts.

  • 3

    5 fasten enclosure 2

    Mount the enclosure and secure it to the bracket.

  • 4

  • 1

    2 mounting

    Fix the bracket included in the mounting kit on the bottom of the enclosure with four M6*12 screws.

  • 2

    3 clamps

    Position the pole clamps together around the pole, then tighten them with bolts, washers, and nuts.

  • 3

    5 fasten enclosure 2

    Mount the enclosure and secure it to the bracket.

  • 4

Weather protection

To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them with PVC tape.

  • 1

    7 pvc tape

    Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector.

  • 2

    8 waterproof tape

    Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds.

  • 3

    9 pvc wrapping

    Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Ensure to cover the head and the tail of the connector.

  • 1

    7 pvc tape

    Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector.

  • 2

    8 waterproof tape

    Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds.

  • 3

    9 pvc wrapping

    Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Ensure to cover the head and the tail of the connector.

Connect the PoE Adapter

If you choose to power the gateway via PoE or access the gateway and internet via the ETH port, you need to refer to this section. Otherwise, skip it.

Connect one end of the Ethernet cable (Cat5e or better) to the ETH(PoE) port on the gateway and the other end to the PoE port of the PoE injector.

Connecting through ethernet

To access the Internet through the ETH (PoE) port, make sure you have completed the steps defined in the "Connect the PoE Adapter section".

Lightning Protection

This section covers the installation of the lightning surge protection system when deploying the RAK7289V2/RAK2789CV2 gateway, both outdoors and indoors. Such a protection system must be taken into consideration to ensure a fully functional gateway without interruptions or damage from lightning.

Outdoor Surge Protection System

Antenna Grounding: we recommend nstalling a lightning arrestor on all the antenna N-type terminals. The arrestors must be N-type Female to Male to fit the antenna and enclosure connectors. Ensure you use a 10 AWG or better wire to connect the screw terminals of the arrestors to the grounding rail mounted on the building wall (grounding bar in the case of field deployment).

Gateway Grounding: Additionally, it is recommended to use another 10 AWG or better grounding wire to connect the screw terminal on the bottom-left side of the gateway casing to the grounding rail (bar).

No additional protection for the Ethernet cabling is required on the gateway side. It already has a built-in surge protection system (GDT + Anti-surge resistor).

Indoor Surge Protection

For protecting the indoor equipment and circuitry connected to the gateway, it is recommended to install an Ethernet port SPD lightning arrestor. This device should be positioned along the cabling that connects the gateway to the PoE injector. Make sure you connect its grounding wire terminal to an appropriate building grounding point.

Should you fail to adhere to the recommendations in this document, RAKwireless carries no responsibility for any damage your equipment incurs due to a lightning strike.

Power On the Gateway


Do not power the device if any antenna port has been left open.

The gateway supports multiple power supply options. Connect the gateway to the appropriate power source based on your needs.

Power Cord + PoE Adapter: The gateway is powered via PoE, make sure you have completed the steps defined in the Connect the PoE Adapter section.

  1. Connect one end of the power cord to the PoE adapter.
  2. Connect the other end of power cord to a power outlet, your gateway can be powered on.

DC Cable: The gateway is powered by an external DC power supply. You need to use the DC cable to connect an external power supply. The external power supply voltage range: 12 VDC.

Domande frequenti

  • How do I power the gateway safely?

    The gateway should be powered using a 12V DC power supply or through PoE (Power over Ethernet, 802.3af). Do not use solar chargers directly. They can supply unstable voltages and may damage the device.

  • Can I use this gateway in off-grid or remote environments?

    Yes. The gateway is compatible with the RAK Battery Plus, making it suitable for solar-powered or off-grid setups.

  • How do I manage the gateway remotely?

    You can manage it using WisDM, RAK’s cloud-based device management platform. It allows you to monitor, configure, and update your gateways remotely. Create a WisDM account, add your gateway by serial number, and start managing devices across your network. Ensure your gateway has internet access for cloud syncing.

  • Does the gateway support firmware updates over the air (FUOTA)?

    Yes. WisGateOS 2 combined with WisDM enables remote firmware updates, configuration changes, and device monitoring.