It looks like you’re visiting from the United States. For the best experience, please visit our U.S. website operated by Powerlube Industrial, our U.S. subsidiary and premium Memolub distributor.

Go to powerlubeind.com

LORAWAN GATEWAY OUTDOOR

Read more Print Download User Guide Download Technical Data Sheet

Descripción del producto

La pasarela para exteriores de la serie Memolub Connect cuenta con componentes de grado industrial, lo que garantiza un alto nivel de fiabilidad. Admite hasta 16 canales LoRa y ofrece opciones de múltiples enlaces de retorno con conectividad Ethernet, Wi-Fi y móvil. Además, cuenta con un puerto específico para diversas opciones de alimentación, como paneles solares y baterías. Su carcasa rediseñada aloja internamente antenas LTE, Wi-Fi y GPS, lo que mejora tanto la estética como la funcionalidad. La pasarela funciona con un sistema operativo seguro y flexible basado en el último núcleo de OpenWrt. Admite módulos de ampliación para una mayor personalización y ofrece gestión y configuración remotas centralizadas a través de WisDM, lo que la hace ideal para el despliegue y el funcionamiento de redes de pasarelas a gran escala.

ADVERTENCIA: Este producto está diseñado para ser alimentado con 12 VCC a través de un puerto de alimentación específico. No se recomienda el uso de cargadores solares, ya que pueden suministrar sobretensión y dañar el dispositivo. Desaconsejamos encarecidamente el uso de dichos cargadores con este producto, y cualquier daño que se produzca como consecuencia de ello anulará la garantía.

Características del producto

Hardware

  • Caja de grado industrial IP67/NEMA-6 con prensaestopas
  • PoE (802.3af) + protección contra sobretensiones
  • Doble concentrador LoRa con opciones de hasta 16 canales
  • Enlace de retorno: Wi-Fi, Ethernet y LTE (opcional, disponible con el modelo RAK7289CV2)
  • GPS
  • Compatible con alimentación de 12 VCC o energía solar con monitorización del consumo eléctrico (kit solar opcional)
  • Antenas internas para Wi-Fi, GPS y LTE; antena externa para LoRa
  • Último suspiro

Software

  • Sistema operativo para configurar y gestionar la pasarela.
  • Extensiones para añadir compatibilidad con funciones como OpenVPN, WireGuard VPN y otras.
  • Gestión remota con WisDM Fleet Management
  • Servidor de red integrado (compatibilidad total con LoRaWAN v1.0.3)
  • Compatibilidad total con la pila LoRaWAN mediante Semtech SX1303
  • Filtrado de tramas LoRa (lista blanca de nodos en modo «Packet Forwarder»)
  • Puente MQTT v3.1 con cifrado TLS
  • Marcado de tiempo de alta precisión
  • Almacenamiento en búfer de tramas LoRa en modo
  • en caso de interrupción del servicio del NS (sin pérdida de datos)
  • Escuchar antes de hablar (opcional)

Installation Guidelines

SIM Card Installation

  • 1

    Unscrewing interface

    Start by unscrewing the cap of the NanoSIM interface on the gateway enclosure to expose the SIM card slot.

  • 2

    Insert SIM card

    Push the SIM card into the card slot according to the placement method marked on the interface.

  • 3

    Unscrewing interface

    Once completed, screw back the metal cap. Make sure it is tightly screwed.

  • 1

    Unscrewing interface

    Start by unscrewing the cap of the NanoSIM interface on the gateway enclosure to expose the SIM card slot.

  • 2

    Insert SIM card

    Push the SIM card into the card slot according to the placement method marked on the interface.

  • 3

    Unscrewing interface

    Once completed, screw back the metal cap. Make sure it is tightly screwed.

Mounting

  • 1

    2 mounting

    Fix the bracket included in the mounting kit on the bottom of the enclosure with four M6*12 screws.

  • 2

    3 clamps

    Position the pole clamps together around the pole, then tighten them with bolts, washers, and nuts.

  • 3

    5 fasten enclosure 2

    Mount the enclosure and secure it to the bracket.

  • 4

  • 1

    2 mounting

    Fix the bracket included in the mounting kit on the bottom of the enclosure with four M6*12 screws.

  • 2

    3 clamps

    Position the pole clamps together around the pole, then tighten them with bolts, washers, and nuts.

  • 3

    5 fasten enclosure 2

    Mount the enclosure and secure it to the bracket.

  • 4

Weather protection

To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them with PVC tape.

  • 1

    7 pvc tape

    Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector.

  • 2

    8 waterproof tape

    Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds.

  • 3

    9 pvc wrapping

    Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Ensure to cover the head and the tail of the connector.

  • 1

    7 pvc tape

    Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector.

  • 2

    8 waterproof tape

    Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds.

  • 3

    9 pvc wrapping

    Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Ensure to cover the head and the tail of the connector.

Connect the PoE Adapter

If you choose to power the gateway via PoE or access the gateway and internet via the ETH port, you need to refer to this section. Otherwise, skip it.

Connect one end of the Ethernet cable (Cat5e or better) to the ETH(PoE) port on the gateway and the other end to the PoE port of the PoE injector.

Connecting through ethernet

To access the Internet through the ETH (PoE) port, make sure you have completed the steps defined in the "Connect the PoE Adapter section".

Lightning Protection

This section covers the installation of the lightning surge protection system when deploying the RAK7289V2/RAK2789CV2 gateway, both outdoors and indoors. Such a protection system must be taken into consideration to ensure a fully functional gateway without interruptions or damage from lightning.

Outdoor Surge Protection System

Antenna Grounding: we recommend nstalling a lightning arrestor on all the antenna N-type terminals. The arrestors must be N-type Female to Male to fit the antenna and enclosure connectors. Ensure you use a 10 AWG or better wire to connect the screw terminals of the arrestors to the grounding rail mounted on the building wall (grounding bar in the case of field deployment).

Gateway Grounding: Additionally, it is recommended to use another 10 AWG or better grounding wire to connect the screw terminal on the bottom-left side of the gateway casing to the grounding rail (bar).

No additional protection for the Ethernet cabling is required on the gateway side. It already has a built-in surge protection system (GDT + Anti-surge resistor).

Indoor Surge Protection

For protecting the indoor equipment and circuitry connected to the gateway, it is recommended to install an Ethernet port SPD lightning arrestor. This device should be positioned along the cabling that connects the gateway to the PoE injector. Make sure you connect its grounding wire terminal to an appropriate building grounding point.

Should you fail to adhere to the recommendations in this document, RAKwireless carries no responsibility for any damage your equipment incurs due to a lightning strike.

Power On the Gateway


Do not power the device if any antenna port has been left open.

The gateway supports multiple power supply options. Connect the gateway to the appropriate power source based on your needs.

Power Cord + PoE Adapter: The gateway is powered via PoE, make sure you have completed the steps defined in the Connect the PoE Adapter section.

  1. Connect one end of the power cord to the PoE adapter.
  2. Connect the other end of power cord to a power outlet, your gateway can be powered on.

DC Cable: The gateway is powered by an external DC power supply. You need to use the DC cable to connect an external power supply. The external power supply voltage range: 12 VDC.

Preguntas frecuentes

  • How do I power the gateway safely?

    The gateway should be powered using a 12V DC power supply or through PoE (Power over Ethernet, 802.3af). Do not use solar chargers directly. They can supply unstable voltages and may damage the device.

  • Can I use this gateway in off-grid or remote environments?

    Yes. The gateway is compatible with the RAK Battery Plus, making it suitable for solar-powered or off-grid setups.

  • How do I manage the gateway remotely?

    You can manage it using WisDM, RAK’s cloud-based device management platform. It allows you to monitor, configure, and update your gateways remotely. Create a WisDM account, add your gateway by serial number, and start managing devices across your network. Ensure your gateway has internet access for cloud syncing.

  • Does the gateway support firmware updates over the air (FUOTA)?

    Yes. WisGateOS 2 combined with WisDM enables remote firmware updates, configuration changes, and device monitoring.