Power Options - 24 VDC PLCd-Control
The MEMOLUB® 24VDC-PLCd-Control model lubricator is powered by an external 24VDC power supply and the frequency and duration of each output cycle is controlled by your PLC (Programable Logic Controller) program. No battery pack is used. It is ideal for lubricating a wide variety of mobile equipment, robots, conveyors, and OEM applications. 
The MEMOLUB® 24VDC-PLCd Control lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding need to disconnect the electrical connections. A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria.
This model offers the same mounting options as the MEMOLUB® HPS, either single-point or remote-mounted using pipe or flexible tubing, or it can only be used with our MEMOLUB® Multi-Point System lubricating from 2 to 12 lube points.
| Specifications: | |
| PLCd (Programmable Logic Controller driven) | |
| Media | Grease ( to NLGI #2) or Oil |
| Lubricant Cartridge Capacity | 120cc , 240cc, 480cc (Replaceable) |
| Delivery Method | Metered Quantity |
| Lubricant Flow Rate | 0.63cc / Stroke - standard |
| Strokes per day | Stroke Frequency Programmed from Customers PLC |
| Operating Pressure | 350psi (25 bar) |
| Operation | Electro-Mechanical- Positive Displacement Pump |
| Feed Type | Single-Point or Multi-Point |
| Temperature Range ** | 5°F to 122°F (-15°C to 50°C) |
| Power Supply | External 24VDC power supply |
| External On/Off Control | Yes |
| Mounting Thread Size | 1/4" NPT(M) - (1/8" NPT(M) available) |
| Multi-Point Compatible | Yes |
| Splitter Block Compatible * | Yes |
| Remote Installation (single-point) | Up to 40 feet (12 meters) |
| * Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings. | |
| ** Lower temperatures can be achieved by using a lowtemp grease an cold-weather battery packs. | |